Products
Lattice Telecom Tower
Product Overview Our lattice telecom towers are mainly angle-steel truss type. We adopt 3-leg design for projects with moderate antenna loads; 4-leg towers are selected for high-wind locations or projects with heavy platform & antenna loading. All tower components are cut, punched and...
Features
Product Overview
Our lattice telecom towers are mainly angle-steel truss type. We adopt 3-leg design for projects with moderate antenna loads; 4-leg towers are selected for high-wind locations or projects with heavy platform & antenna loading.
All tower components are cut, punched and pre-assembled inside our factory before shipment. Delivered as bundled, clearly marked steel members. Installation teams assemble the tower on site purely with bolts. No on-site welding on the tower body. Foundation anchor bolts and earthing works are completed on-site by local contractors.
Galvanization is carried out after full fabrication. Average zinc coating thickness reaches 85 µm minimum, with single-point thickness no less than 70 µm.
Typical applications include rural communication coverage, mountain relay stations, coastal highway routes and mining sites. Most common tower heights are between 20m and 45m. For heights above 60m, we usually recommend alternative structural solutions. Reach out to us to discuss custom high-rise tower requirements.

Why this structure
Wind passes through the truss structure, effectively cutting wind load. At the same height, lattice towers weigh significantly less than monopole towers. This means smaller foundation size and lower requirements for on-site lifting equipment.
Bolted connection, no field welding. Components come bundled and tagged. A 40m tower with platforms can be erected within 2–3 days by a crew of 4–6 workers.
Post-fabrication hot-dip galvanizing, not touch-up paint. Full members are dipped into molten zinc. Coating inspection reports are issued before packing.
Standard 3-leg / 4-leg design, height range 10–60m. Accessories including ladders, rest platforms, antenna platforms, fall protection systems, aviation obstruction lights and lightning protection can be quoted separately. You only pay for accessories your site actually needs.
Where these go
Rural 4G/5G coverage for hilltop sites with limited crane access
Point-to-point microwave communication links
Broadcast & public safety transmission projects
Mining areas, islands and highway corridors
Temporary or emergency communication towers that require disassembly and relocation later
Basic Parameters
|
Item |
Specification |
|
Product Name |
Lattice Telecom Tower |
|
Material |
Q235B/Q355B/Q420B |
|
Surface treatment |
Hot-dip galvanizing |
|
Structure type |
3-leg or 4-leg angle steel lattice |
|
Height |
10–60 m standard |
|
Connection |
High-strength bolts, Grade 8.8 (Grade 10.9 upon request) |
|
Design wind speed |
Site-specific, typically 30–50 m/s |
|
Design working life |
30–50 years, depending on site corrosivity category |
|
Ancillaries |
Ladder, rest platform, antenna platform, fall arrest system, aviation light, lightning protection (optional) |
|
Packing |
Bundled and tagged, container or break-bulk |
|
Lead time |
Typically 25–30 days after drawing approval, varies with tonnage |
|
Certificates |
ISO 9001, mill certificates, galvanizing inspection report, third-party inspection on request |
FAQ
Q: How to choose between 3-legged and 4-legged lattice telecom towers?
A: Three legs use less steel and need a smaller foundation - fine for sites with few antennas and few platforms. Four legs are stiffer and hold up better under high wind, multiple platforms or heavy antenna counts. The final call comes from the loading calculation, not habit.
Q: What is the service life of hot-dip galvanized coating?
A: Average 85 µm or thicker to GB/T 13912. Inland, in ordinary atmospheres, that carries the structure for decades. Coastal and industrial atmospheres burn zinc faster through salt and sulphides - for those sites we increase coating thickness or add a paint system. The honest service life figure depends on the corrosivity category of your site.
Q: How do you arrange shipment?
A: Members are bundled, tagged and shipped with a packing list. For most tower types we load 40HQ containers; over-length members go break-bulk or in flat-rack containers.
Q: What information do you need for quotation?
A: If formal drawings are available, we can quote directly from them. If drawings are not ready, please provide site wind speed, tower height, platform quantity, antenna model and mounting height. Our technical team will work out the quotation for you.
Send over your site parameters or construction drawings, our engineering team will prepare custom quotation for your lattice telecom tower project.
Hot Tags: lattice telecom tower, China lattice telecom tower manufacturers, suppliers, factory, 5g telecom tower, communication single tube tower, communication towers, guyed communication tower, guyed lattice tower, Tubular Steel Pole Tower
You Might Also Like
Send Inquiry


